Sharp FO-90, Service Manual

Page: 18 / 108

UX-68ES/F/GG/IT
FO-90IT
2 – 6
1 Auto gain control(MODEM) Enable Disable 1 1 1 1
2 End Buzzer Yes No 1 1 1 1
3 Disconnect the line when DIS is received in RX mode No Yes 1 1 1 1
4 Equalizer freeze control(MODEM) On Off 0 0 0 0
5 Equalizer freeze control 7200 bps only No Yes 0 0 0 0
6 CNG transmission in manual TX mode Yes No 1 1 1 1
7 Initial compression scheme for sharp fax in TX mode MR mode H2 mode 0 0 0 0
8 Modem speed automatic down when RX Yes No 0 0 0 0
level is under -40dBm
EOL detect timer 5 seconds 13 seconds 20 seconds 25 seconds
1 No. 1 0 0 1 1 0 0 0 0
2 No. 2 0 1 0 1 1 1 1 1
3 Reserved 0 0 0 0
4 Reserved 0 0 0 0
5 Reserved 0 0 0 0
6 Reserved 0 0 0 0
7 Reserved 0 0 0 0
8 Reserved 0 0 0 0
1 Reserved 0 0 0 0
2 Auto dial fax transmission by REDIAL key Yes No 0 0 0 0
3 Reserved 0 0 0 0
4 Recall interval Binary input 0 0 0 0
5 (0~15.5min setting by 0.5min step) No. = 16 8 4 2 1 1 1 1 1
6 4 5 6 7 8 0 0 0 0
7 0 1 0 1 0 1 1 1 1
8 0 0 0 0
1 Recall times(0~15times setting) Binary input 0 0 0 0
2 No. = 8 4 2 1 0 0 0 0
3 1 2 3 4 1 1 1 1
4 0 0 1 0 0 0 0 0
5 Dial tone detection(Before auto dial) No Yes 1 1 1 1
6 Reserved 0 0 0 0
7 Busy tone detection(After auto dial) No Yes 1 1 1 1
8 Busy tone detection pulse number 4 pulses 2 pulses 0 0 0 0
(After auto dial)
Waiting time after dialing 45 seconds 55 seconds 90 seconds 140 seconds
1 No. 1 0 0 1 1 1 1 1 1
2 No. 2 0 1 0 1 0 0 0 0
3 PBX connection Yes No 0 0 0 0 OPTION
4 Reserved 0 0 0 0
PBX recall function(R key select) NO OPERATION FLASH
5 No. 5 0 1 1 1 1 1
6 No. 6 0 1 1 1 1 1
PBX select ID FLASH OPTION
7 No. 7 0 1 0 0 0 0
8 No. 8 0 1 0 0 0 0
1 Dial pausing(sec/pause) 4 sec 2 sec 1 1 1 1
2 Dial mode Tone Pulse 1 1 1 1
3 Pulse
→
Tone change function by key Enable Disable 1 1 1 1
4 Dial pulse make/break ratio(%) 40/60 33/67 0 0 1 1
Auto dial mode Delay timer of before line 0 second 1.5 seconds 3.0 seconds 4.5 seconds
5 connect No. 5 0 0 1 1 0 0 0 0
6 No. 6 0 1 0 1 1 1 1 1
7 Reserved 0 0 0 0
8 Reserved 0 0 0 0
SW
NO.
DATA
NO.
ITEM
Switch setting and function
1 0
SW
l
A6
SW
l
B3
SW
l
B2
SW
l
A7
SW
l
B1
SW
l
B4
ES F GG IT
Remarks
Initial setting