Sharp FO-5900 Operation Manual Download Page 82

Page: 82 / 131

Timer Operations

Press

and/or

to adjust the resolution and contrast if

desired, and then press

Load the document and then press

•

The document will be scanned into memory.

RESOLUTION

CONTRAST

START/

ENTER

START/

ENTER

Polling

(Continued from

Initial procedure

Dial the machine to be polled using one of the following methods:

•

Press a Rapid Key.

•

Press

and enter a Speed Dial number (if you enter less than 2

digits, press

to complete the entry).

•

Enter a full fax number with the numeric keys.

Press

SPEED DIAL

START/

ENTER

START/

ENTER

Serial Polling

(Continued from

Initial procedure

Dial the machines to be polled using one or more of the following

methods:

•

Press one or more Rapid Keys.

all.book

Page 80

Wednesday, February 19, 2003

1:34 PM

Summary of Contents for FO-5900




































































































































Search results

Summary of Contents for FO-5900

Reviews:

Related manuals for FO-5900

Brands by name

Popular brands

Sharp FO-5900, Operation Manual

Search results

Summary of Contents for FO-5900

Reviews:

Related manuals for FO-5900

Brands by name

Popular brands