Quick Reference Guide
56
SELECT AUTO RECEIVE
Press
1
to have your fax automatically
answer a call after 5 rings in A.M. mode if
an answering machine connected to the fax
fails to answer before that time. Press
2
to
turn off the function.
LANGUAGE SELECT
Use this to change the language used in the
display, reports and lists. Press the
START
key, press
*
or
#
until the desired language
appears in the display, and then press the
START
key again.
PBX CONNECTION
Use this setting if your fax is connected to a
PBX. Press
1
to select YES, and then select
the mode for connection to an outside line
(
1
for ID, or
2
for FLASH). If you selected ID,
enter your PBX ID number and then press
the
START
key.
FAX SIGNAL RECEIVE
Press
1
to have your fax automatically begin
reception if you hear a soft fax tone after
answering a call. Press
2
to turn the
function off (turn the function off if you use a
computer fax modem on the same line).
JUNK NUMBER CHECK
Press
1
to block reception from fax numbers
entered in the Anti Junk Number List. Press
2
to allow reception from all numbers.
POLLING
Press
1
to use Rapid Key 15/POLL as a
polling key. Press
2
to use it as a regular
Rapid Key.
CALLER ID
If you subscribe to a Caller ID service and
want to use the Caller ID function, Press
1
.
To turn Caller ID off, press
2
. (
Note:
This
setting is not available in some countries.)
AUTO COVER SHEET
Press
1
to have the fax automatically
generate a cover sheet and send it as the
last page of each transmission. Press
2
to
turn the function off.
AUTO PRINT OUT
Press
1
to have your fax automatically print
out an Activity Report once every 30
operations. (The list can still be printed out
on demand when desired.) Press
2
to turn
off automatic print out.
ECM MODE
Press
1
to have the fax machine correct any
distortions in a fax transmission or reception
before printing the fax at the receiving end
(note that the other fax machine must also
have ECM mode). Press
2
to turn off the
function.
