Sharp FO-10, Operation Manual

Page: 69 / 198

Optional A.M. Mode Settings
68
Quiet Detect Start Time
This setting can be used to delay the start of the Quiet Detect Time
function. For example, if you want to insert a pause at the begining of
your answering machine’s outgoing message to ensure clear detection
of fax signals, you can use this setting to delay the start of silence
detection so that the pause will not cause the fax to take over the line.
Quiet Detect Start Timing has been set to 5 seconds at the factory. To
change the setting, follow the steps below.
As general guide, the delay time should be slightly longer than the
pause before the outgoing message.
1
Press these keys:
2
Press a number from
00
to
15
.
FUNCTION
3
Press the
STOP
key to return to the
date and time display.
STOP
4
QUIET START TIME
(Example)
0 5
The display will show:
all‑fo50hk.book Page 68 Thursday, August 26, 1999 4:15 PM