background image

EN - 21

NOTE: Program DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF 

LAUNDRY, TAP WATER, AMBIENT TEMPERATURE AND SELECTED ADDITIONAL 

FUNCTIONS.

(*) Washing water temperature of the program is the factory default.
(**) If your machine has the rapid wash auxiliary function, you can enable the quick wash option on the 

display panel and load the machine with 2 kg or less laundry to wash it in 30 minutes.

(***

) Due to the short washing time of this program, we recommend that less detergent is used. The 

program may last longer than 15

 minutes if your machine detects an uneven load. You can open the 

door of your machine 2 minutes after the completion of a washing operation. (The 2 minute period is 

not included in the program duration).

According to regulation 1015/2010 and 1061/2010, the program 1 and the program 2 are respectively the 

‘Standard 60°C cotton program’ and the ‘Standard 40°C cotton program’.

The Eco 40-60 program is able to clean normally soiled cotton laundry declared to be washable at 40°C 

or 60°C, together in the same cycle, and that this program is used to assess the compiance with the EU 

ecodesign legislation.

Summary of Contents for ES-NFB9141WD-EN





































Reviews: