Sharp ER-A347 Instruction Manual Download Page 57

Page: 57 / 115

■

Discount (

)

Procedure

Program each item as follows:

The screen continues.

• AMOUNT (Use the numeric entry)

Discount amount (max. 8 digits)

• TEXT (Use the character entry)

Description for the discount key. Up to 12 characters can be
entered.

• SIGN (Use the selective entry)

Programming of the + or - sign assigns the premium or
discount function to the discount key.
+: Plus amount (premium)
-: Minus amount (discount)

• HALO (High Amount Lockout) (Use the numeric entry)

This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 999999.99

• ITEM (Use the selective entry)

YES: Enables the item discount.
NO: Disables the item discount.

• SUBTOTAL (Used the selective entry)

YES: Enables the subtotal discount.
NO: Disables the subtotal discount.

• TAX 1 through 4 (Use the selective entry)

Taxability for the discount
YES: Taxable
NO: Non-taxable

Summary of Contents for ER-A347




















































































































Search results

Summary of Contents for ER-A347

Reviews:

Related manuals for ER-A347

Brands by name

Popular brands

Sharp ER-A347, Instruction Manual

Search results

Summary of Contents for ER-A347

Reviews:

Related manuals for ER-A347

Brands by name

Popular brands