background image

 

Do not disassemble or repair the appliance or replace any components    

 

For repair services, please contact SHARP service center to avoid   

electric shock, short circuit, fire hazard, etc.   

If the appliance happens to be dropped or is broken, stop using it and 
please  

send it to the SHARP service center for repair services

 

Otherwise, it may result in electric shock or even fire hazard. 

 

If the appliance is dropped into the water, do not reach for it. Switch off    

Keep the appliance away from water and fire, and do not use the 

 

Do not use the appliance on inflammable objects like paper, cloth, carpet   
or plastic bags. 

 

Do not use the appliance on uneven places. 

 

When using the appliance, do not place appliance near the wall or furni-

The appliance must not be immersed into the water.     

 

The appliance will be damaged, and it may cause short circuit or 

If the oven is positioned close to a wall, the wall will have burn or stain

 

Please ensure that hanging fabrics are not placed nearby or in ????contact    

Do not put anything between the bottom of oven and the surface    

 

Any object so placed could be burned or deformed. 

Do not put anything on the oven during operation. 

 

The heat could cause deformation, cracking, etc. 

 

by yourself. Only components supplied by SHARP can be used.   

all power sources, drain the water away then only retrieve the appliance 
to be sent for repairs. 

ture or under the sunlight, or places where it may be splashed by oil. 

electric shock. 

marks. 

with the oven body. 

it is set on. 

appliance on an inclined or unstable platform, to avoid from any 

accidents or damages.

-5-

Summary of Contents for EO-187-BK

















Reviews: