Sharp EL-5060, Operation Manual

Page: 76 / 116

– E-4 –
If service should be required on this calculator, use only a
SHARP servicing dealer, SHARP approved service facility, or
SHARP repair service where available.
Hard Case
DISPLAY
• During actual use, not all symbols are displayed at the same
time.
• Only the symbols required for the usage under instruction are
shown in the display and calculation examples of this manual.
/
: Appears when the entire equation cannot be displayed.
Press
< / > to see the remaining (hidden) sec-
tion.
xy / r θ θθ θθ : Indicates the mode of expression of results in the
complex calculation mode.
: Indicates that data can be visible above/below the
screen. Press
[
/
]
to scroll up/down the view.
2ndF : Appears when
@
is pressed.
HYP : Indicates that
h
has been pressed and the hyper-
bolic functions are enabled. If @H are pressed,
the symbols “ 2ndF HYP ” appear, indicating that in-
verse hyperbolic functions are enabled.
ALPHA: Appears when
K
(STAT VAR),
O
or
R
is
pressed.
FIX/SCI/ENG: Indicates the notation used to display a value.
DEG/RAD/GRAD: Indicates angular units.
: Appears when matrix mode is selected.
: Appears when list mode is selected.
: Appears when statistics mode is selected.
M : Indicates that a value is stored in the independent
memory.
Exponent
Equation →
Display
Mantissa
← Symbol
EL5060E_En0616.pm65 06/16/2004, 13:10 4