Page 4 of 6
should clean your kettle before use by boiling a full kettle of water twice and
then discarding the water. Wipe the surface with a damp cloth.
NOTE
: the max capacity of kettle is 1.7L.
OPERATION OF YOUR KETTLE
1. To fill the kettle, remove it from the power base and open the lid. “by
pressing the open lid button backwards and lifting it. Fill with the desired
amount of water and then close the lid. Alternatively, the kettle may be
filled through the spout. The water level should not exceed the MAX
mark or sit below the MIN mark. Too little water will result in the kettle
switching off before the water has boiled.
NOTE:
i.
Do not fill the water over the maximum level, as water may spill out of
the spout when boiling. Ensure that the lid is firmly in place before
plugging into the power outlet.
2. Position the kettle on the power base and face the spout away from you.
3. Connect the plug into a power outlet. Turn on the switch by pressing it to
Position “1”, you will see the indicator light up. The kettle will start to boil
the water and will automatically switch back to Position “0” once the
water has boiled.
You can shut off the power by turning off the switch at
any moment during boiling water. If you want to boil water again, only
turn on the switch directly to restart the kettle. The boiling process can
be terminated at any time by lifting the kettle off the Power Base.
NOTE:
Ensure that switch is free of obstructions and the lid is firmly closed,
the kettle will not turn off if the switch is constrained.
4. Lift the kettle, using the handle from the power base and then pour the
water.
NOTE:
Always take care when pouring boiling water and avoid tipping the
kettle too fast.
5. The kettle will not re-boil until the switch is pressed again. The kettle
