background image

13

Troubleshooting and product s

1)

When using the vacuum cleaner

Please keep away from heaters, such as radiators and cigarette butts, etc.

2)

Before using the vacuum cleaner

Please remove large and sharp objects to prevent the machine from being damaged

after collision.  Do not suck  up flammable materials or liquids, such as  gasoline or 

cigarettes, alcohol, etc. 

3)Do

 not turn the machine upside down when replacing the filter to prevent liquid or

dust from falling into the motor, causing faults and dangers.

※P

recautions

roubleshooting

Battery                            25.9V/2200mAh

Charging time                3~4hours

Adaptor input                100-240V~50/60Hz

Adaptor output              30V      0.8A

Power                              380W

1、Empty the dust cup

2、Check if the dust cup is installed correctly

3、Check if the filter case and the filter are installed

correctly

4、Clean the filter

1、Charge the vacuum

2、Clean the roller brush and the bearing thoroughly

1、Check if the plug has been inserted already

2、Check if the socket is useful

Suction gets weak

Stop working

Battery does`t hold

a charger                         

Summary of Contents for EC-SC95U-H












Reviews: