background image

 IMPORTANT NOTICE: This warranty applies only to products sold in Australia

WARRANTY

Congratulations on Your Purchase!

This Sharp vacuum cleaner is warranted against faults in material and manufacture for the

24 months period.
If service is required during the warranty period, please contact your nearest Sharp 

Approved Service Centre. These repairs would be carried out at no charge to the 

owner, subject to the conditions specified herein. 

This warranty does not extend to defects or injuries caused by or resulting from causes 

not attributable to faulty parts or the manufacture of the product, including but not 

limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of 

maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation, 

software, or any alterations made to the product which are not authorised by Sharp.

Please retain your sales documentation, as this should be produced to validate a 

warranty claim. This warranty is in addition to and in no way limits, varies or excludes 

any implied rights and remedies under any relevant legislation in the country of sale.

This warranty does not cover transportation to and from the Sharp Approved Service 

Centre. Goods presented for repair may be replaced by refurbished goods of the same 

type rather than being repaired. Refurbished parts may be used to repair the goods. 

The repair of your goods may result in the loss of user generated data, please ensure 

that you have saved this data elsewhere prior to repair.
Australian customers: Our goods come with guarantees that cannot be excluded 

under the Australian Consumer Law. You are entitled to a replacement or refund 

for a major failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired or replaced 

if the goods fail to be of acceptable quality and the failure does not amount

to a major failure. The criteria of a major failure is defined in the Australian 

Consumer Law. Should you require any assistance with a major failure please contact 

Sharp Customer Care.

1300 742 770

Summary of Contents for EC-SC95U-H












Reviews: