30
|
Setting up Sharp MFP devices to use with Send to eCopy
Creating a profile that uses an FTP folder
When you configure the MFP device, you specify information about the target FTP site and the
authorized FTP user in a profile.
Make sure that you have the device’s IP address before you begin.
To configure the MFP:
1
Open a Web browser.
2
In the Address bar, type the Internet address (URL) for the device you want to connect to,
using the format
http://
device_IP_address
, and then press E
NTER
. The System Information
page opens.
3
Under
Image Send Management
, click
Destination
.
4
Log in to the device.
5
Under
New Destination
, click
FTP
.
6
Under
FTP Destination Control
, make sure that you specify the following information, which is
required by Send to eCopy, in addition to any information that is required by the device:
Hostname or IP Address
— Enter the address of the FTP site, such as:
10.10.12.110
.
User Name
— Enter the name of the FTP user created to access the FTP site, such as:
FTPeCopy
.
Password
— Enter the password of the FTP user.
Directory
— Enter the path to the target FTP folder created for temporary storage of the
scanned image files, such as:
\scans
or
\scans\HR
.
7
Click
Submit
. When the “Your request was successfully processed” message appears, the
configured profile is available at the device.
Note:
To use this profile with Send to eCopy, you must enter user name, password, and
directory information, even though the screen indicates that the fields are optional.
