DISASSEMBLY INSTRUCTIONS
B2-5
2-15: LOADING GEAR S/T UNIT (Refer to Fig. 2-15-A)
1.
2.
Remove the E-Ring
1
and remove the Main Loading
Gear.
Remove the Main Rod, Tension Lever, Loading Arm S
Unit and Loading Arm T Unit.
1
Main Rod
Main Loading Gear
Tension Lever
Loading Arm T Unit
Loading Arm S Unit
Fig. 2-15-A
2-13: CAPSTAN DD UNIT (Refer to Fig. 2-13)
Remove the Capstan Belt.
Remove the screw
1
.
Remove the Capstan Holder.
Remove the 3 screws
2
.
Remove the Capstan DD Unit.
1.
2.
3.
4.
5.
• Screw Torque: 4
±
0.5kgf•cm
Capstan DD Unit
Capstan Belt
Fig. 2-13
1
2
Capstan Holder
2
2
Fig. 2-14-A
NOTE
In case of the Pinch Roller Cam and Main Cam
installation, install them as the circled section of Fig. 2-
14-B so that the each markers are met. (Refer to Fig.
2-14-B)
2-14:
Remove the E-Ring
1
, then remove the Main Cam.
Remove the E-Ring
2
, then remove the Pinch Roller
Cam and Joint Gear.
1.
2.
MAIN CAM/PINCH ROLLER CAM/JOINT GEAR
(Refer to Fig. 2-14-A)
1
Main Cam
Pinch Roller Cam
Joint Gear
2
1.
NOTE
1. When you install the Loading Arm S Unit, Loading Arm
T Unit and Main Loading Gear, align each marker.
(Refer to Fig. 2-15-B)
Fig. 2-15-B
Loading Arm T Unit
Main Loading Gear
Marker
Marker
Loading Arm S Unit
Fig. 2-14-B
Pinch Roller Cam
Main Cam
Marker
