– 19 –
EN
VCR OPERATION
Recording from DVD to VCR
To activate DVD function, press
DVD
.
Insert a non-copyright-protection DVD, then press
PAUSE
at the point where you want to start recording.
Press
VCR
, then insert a tape with its erase-prevention
tab in place. Make sure the VCR function is in Stop mode
after you find your recording point.
Press
TAPE SPEED
to choose your recording speed.
SP or LP appears on the front panel display.
Press
0
,
0
,
4
, with the
numerical buttons
, then “disc”
briefly appears on the front panel display.
Press
REC/OTR.
• The recording of the DVD’s paused image selected at
step starts.
Press
DVD
, then press
PLAY
.
• The recording of the DVD’s moving image starts.
To stop recording, press
VCR
, then
STOP
.
8
7
2
6
5
4
3
2
1
Copying a Video Tape
You can make copies of videotapes made by friends or rela-
tives for your own enjoyment.
WARNING: Unauthorised recordings of copyrighted
video tapes may be an infringement of copyright laws.
Connect the recording VCR/DVD (this unit), playing VCR
(another VCR) and your TV as outline in the following dia-
gram.
Insert a pre-recorded tape into the playing VCR.
Insert a tape with its erase prevention tab in place into
the cassette compartment of the recording VCR/DVD.
2
1
DVD
DIGITAL
AUDIO OUT
ANALOG
AUDIO OUT
S-VIDEO
OUT
L
R
VCR
AV2 (DECODER)
AV1 (TV)
DVD/VCR
A E R I A L
R F O U T
to RF OUT
to aerial
jack
[Source (Playing) VCR <Monaural>]
(another VCR)
to 21-Pin
scart terminal
[TV set]
(Use for monitoring)
[Editing (Recording) VCR/DVD]
(
)
Round
coaxial cable
(supplied)
Press
TAPE SPEED
to select the desired recording
speed (SP/LP).
Select “AV2” position on the recording VCR/DVD.
Press
REC/OTR
on the recording VCR/DVD.
Begin playback of the tape in the playback VCR.
To stop recording, press
STOP/EJECT
on the recording
VCR/DVD, then stop playback of the tape in the playing
VCR.
NOTES:
• For best results during dubbing, use the VCR/DVD’s
front panel controls whenever possible. The remote
control might affect the playback VCR’s operation.
• If video or colour fades in and out, you may be copying
a copy guarded video tape.
• Unauthorised recording of copyrighted materials may
infringe on the rights of copyright owners, violate copy-
right laws and may not record clearly.
To monitor the recording
Turn on the TV and select the video channel on the TV.
7
6
5
4
3
• To check the Counter, or Clock & Channel number,
press
DISPLAY
. Each time you press
DISPLAY
, TV screen
will change as illustrated:
When you select the channel using the
numerical
buttons
, select the desired channel (position number).
■
SP
0:12:34
■
SP
17:40
P02
<CLOCK and CHANNEL
NUMBER mode>
<COUNTER mode>
Press once.
Press once.
Press once.
<OFF mode>
Status Display
NOTE:
If the display shows an abnormal reading or no read-
ing, press
RESET
button on the bottom of the
VCR/DVD.
This VCR/DVD will operate with any cassette that bears the
VHS mark. For best results, we recommend the use of high-
quality tapes. Do not use poor quality or
damaged tapes.
• You can prevent accidental erasing of
a recording by breaking off the erase-
prevention tab on the back edge of the
cassette.
• If you decide to record on the tape
again, cover the hole with plastic tape.
Tab
Video Cassette Tape
If a tape includes both programmes recorded in the PAL sys-
tem and ones recorded in the NTSC system, this function
may not be operated correctly.
Press
VCR
, then
SEARCH MODE
twice.
Press
K
or
L
repeatedly until the desired time appears.
Press
s
or
B
.
The VCR/DVD begins rewinding or fast forwarding to the
specified point.
When 0:00 is reached, the VCR/DVD will start playback auto-
matically.
NOTES:
• Time Search can be set up to 9 hours 59 minutes
(9:59).
• This function will not operate in the Recording mode.
• Operations must be followed up within 30 seconds,
from steps
to
. Otherwise the Time Search mode
will be cancelled.
• To exit the Time Search mode, press
MENU
in step
.
Or press
STOP
after step
.
3
2
3
2
3
2
1
Time Search
Before recording, select the tape speed : SP mode (Standard
Play) or LP mode (Long Play).
The table below shows the maximum recording/playback
time using E-60, E-120, E-180 or E-240 tapes in each mode.
T
YPE OF TAPE
R
ECORDING
/P
LAYBACK
T
IME
T
APE
S
PEED
SP M
ODE
LP M
ODE
E-60
1
HOUR
2
HOURS
E-120
2
HOURS
4
HOURS
E-180
3
HOURS
6
HOURS
E-240
4
HOURS
8
HOURS
Two Different Tape Speeds
H97D1ED(EN)v2.qx4 04.9.9 11:53 Page 19
