Sharp DV-NC100H Operation Manual Download

Page: 7 / 32

– 7 –

FRONT PANEL

1. OPERATE

To turn the unit ON or OFF.
The indicator is on when this unit is turned on.

2. Cassette Compartment
3. OPEN/CLOSE (DVD)

To open or close the disc tray.

4. VCR OUTPUT indicator

The indicator is on when this unit is in the VCR mode.
Make sure that this indicator is on before VCR opera-
tion.

5. DVD OUTPUT indicator

The indicator is on when this unit is in the DVD mode.
Make sure that this indicator is on before using the DVD
player.

6. Disc tray
7. PLAY (DVD)

To begin disc playback.

8. STOP (DVD)

To stop playback.

9. OUTPUT

To select the DVD mode or VCR mode.

10. CHANNEL

To change TV channels.
To adjust the tracking manually during VCR playback

11. Display

21. MAIN (AC power cord)

Connect to a standard AC plug.

22. COAXIAL DIGITAL AUDIO OUT jack (DVD Only)

Connect to a compatible Dolby Digital receiver. Use to
connect to a Dolby Digital decoder, DTS decoder or
MPEG decoder.

23. AUDIO OUT jack (ANALOG Left/Right) (DVD Only)

Connect to the Audio input jacks of A/V-compatible TV

24. S-VIDEO OUT jack (DVD Only)

Use the S-Video cable to connect this jack to the S-
Video jack on your A/V-compatible TV or wide screen
TV for a higher quality picture.

25. EURO AV1 (TV) OUT terminal

Use the scart cable to connect this terminal to the 21
pin scart terminal on your A/V-compatible TV or wide
screen TV for a best quality picture.

26. EURO AV2 (DECODER) terminal (VCR Only)

Use the scart cable to connect this terminal to the 21
pin scart terminal on your decoder.

27. RF OUT jack

Use the supplied round coaxial cable to connect this
jack to the ANTENNA IN jack on your TV.

28. AERIAL jack

Connect your antenna, Cable Box, or Direct Broadcast
System.

FUNCTIONAL OVERVIEW

PULL OPEN

DV- N C 1 0 0

OPERATE

OPEN/CLOSE

PLAY

STOP

DVD

VCR

TIMER

REC

PLAY

REW

STOP/
EJECT

(TRACKING)

OUTPUT

4 5

8 7

REAR VIEW

DVD

DIGITAL

AUDIO OUT

ANALOG

AUDIO OUT

S-VIDEO

OUT

VCR

AV2 (DECODER)

AV1 (TV)

DVD/VCR

A E R I A L

R F O U T

27 28

COAXIAL

12. Remote Sensor
13. TIMER indicator

The indicator is on when the VCR/DVD is in standby
mode for a timer recording or during a One Touch
Recording.

14. REC (VCR)

Press once to start recording or repeatedly to start One
Touch Recording.
The indicator is on during recording.

15. PLAY (VCR)

To begin tape playback

16. STOP/EJECT (VCR)

To stop playback.
To eject the tape in the Stop mode.

17. FF (VCR)

To fast forward the tape.

18. REW (VCR)

To rewind the tape.

19. AUDIO IN AV3 jacks (VCR Only)

Connect audio cables coming from the audio out jacks
of a camcorder, another VCR, or an audio source here.

20. VIDEO IN AV3 jack (VCR Only)

Connect a cable coming from the video out jack of a
camcorder, another VCR or an audio-visual source
(laser disc player, video disc player, etc.) here.

H9741BD(EN)_v2.qx4 04.9.6 13:49 Page 7

Summary of Contents for DV-NC100H

































Search results

Summary of Contents for DV-NC100H

Reviews:

Related manuals for DV-NC100H

Brands by name

Popular brands

Sharp DV-NC100H, Operation Manual

Search results

Summary of Contents for DV-NC100H

Reviews:

Related manuals for DV-NC100H

Brands by name

Popular brands