manualshive.com logo in svg

Sharp DV-L88, Operation Manual, Page: 41 / 117

Share
Download
Sharp DV-L88 Operation Manual Download Page 41

GB

40

SETTING UP

Battery Capacity Indicator

• The battery capacity indicator appears only while the display mode is “on”. The

indicator appears for a short while and then disappears.

• Battery condition, temperature, and operational conditions affect the

remaining capacity of a battery. Because of this the battery capacity
indicator is intended to be for reference purposes only.

• Regardless of the display mode, the low battery warning appears on the

display whenever the battery is about to go dead.

• The low battery warning does not appear when the display panel is closed.

When the Indicator lamp flashes green, replace the battery pack with a
charged one or switch to AC adapter power.

• The low battery warning is being displayed until the battery goes dead. When the

battery goes dead, the Indicator lamp turns off. When this happens, replace the
battery pack with a charged one or switch to AC adapter power.

    

➜

➜

    

    

Full charge

Low

Flashing

Summary of Contents for DV-L88






















































































































Reviews:

No comments