GB
50
SETTING UP
Setup
Setting the MPEG
• At first, set the “SPEAKER” setting in “SPEAKER SETUP” to “2ch”. (See
page 56.)
1
While a disc is stopped, press
SETUP
to display the Setup screen.
2
Use
'
or
"
to select the “
AUDIO SETUP”.
3
Press
ENTER
and then use
'
or
"
to select “MPEG”.
4
Press
ENTER
to display the settings you
can select.
5
Use
'
or
"
to select “BITSTREAM” or “PCM”.
BITSTREAM:
Use this setting for a digital connection of a receiver
(amplifier) equipped with an MPEG Audio decoder.
PCM:
Use this setting for a digital connection to the PCM digital
input jack of a DAT or MD, or for a digital connection to a
receiver (amplifier) that does not have an MPEG Audio
decoder.
6
Press
ENTER
to confirm the setting.
• To exit the Setup screen and return to the Startup screen, press
SETUP
or
RETURN
.
• When playing a disc recorded using DTS, the bitstream type signal is output
regardless of the setting of “
DIGITAL” and “MPEG”.
AUDIO SETUP
COMPRESSION: ON
MPEG:
PCM
BITSTREAM
BITSTREAM
BITSTREAM
DIGITAL:
