Sharp DV-500D Technical Manual Download Page 73

Page: 73 / 117

DV-560H

5. MAINTENANCE CHECK ITEMS AND EXECUTION TIME

5-1

Parts

Maintained

1,000 hrs.

2,000 hrs.

Pickup

Spindle Unit

Sled Motor

Loading Motor

Belt

Note

: Part Replacement

: Cleaning

(For cleaning, use a lint-free cloth danpened with pure isopropyl alcohol.)

Use the following table as a guide to maintain the mechanical parts in good operating condition.

CARES WHEN USING THE PICKUP

1. The laser light having wavelength 650 nm is emitted from the objective lens. BE CAREFUL SO THAT THE LASER

LIGHT DOES NOT ENTER DIRECTLY INTO YOUR EYE.

2. The semiconductor laser may be easily damaged by electrostatic charges. When handling the pickup, take care so that

the electrostatic charge is not generated.

3. The semiconductor laser may be easily damaged by overcurrent. Use the power supply unit which does not give any

spike current when the power is turned on and off.

4. Carefully remove the dust and dirt from the objective lens with the lens blower.

When handling the objective lens, take due care so that it is not contaminated with fingerprint, etc. If the objective lens

is contaminated, impregnate the cleaning paper with a small quantity of solvent (isopropyl alcohol), and gently wipe to

clean.

5. The ozone layer depleting components (ODC) are not used in the production process for the product.

MECHANICAL PARTS REGUIRING PERIODICAL INSPECTION

Summary of Contents for DV-500D






















































































































Search results

Summary of Contents for DV-500D

Reviews:

Related manuals for DV-500D

Brands by name

Popular brands

Sharp DV-500D, Technical Manual

Search results

Summary of Contents for DV-500D

Reviews:

Related manuals for DV-500D

Brands by name

Popular brands