Sharp DT-400 Owner'S Manual Download

Page: 52 / 67

-52

Selecting the On-screen
Display Language

The projector can switch the on-screen display
language among 11 languages: English, German,
Spanish, Dutch, French, Italian, Swedish, Portu-
guese, Chinese, Korean or Japanese.

Example: “Language” menu screen for

INPUT 1 mode

Press

on the remote control.

•

The “Picture” menu will be displayed.

Press

to select the “Lan-

guage” menu icon (

•

The “Language” menu will be displayed.

Press

to select the desired

language, and then press

•

The language you selected will be set as
the on-screen display.

Press

•

The “Language” menu will disappear.

Note

•

This procedure can also be performed by using
the buttons on the projector.

Selecting the On-screen Display Language and the
Projection Mode

Setting the Projection
Mode

This projector is equipped with a reverse/invert
image function that allows you to reverse or in-
vert the projected image for various applications.

Menu operation

Page 40

Example: “PRJ Mode” menu screen

Description of PRJ Modes

Note

•

This function is used for the reversed image and
ceiling-mount setups. (See page

Description

Normal image

Inverted image

Reversed image

Reversed and inverted image

Selectable items

Front

C Front

Rear

C Rear

Front

Rear

C Front

C Rear

DT400_E_P47_52.p65

04.10.18, 1:25 PM

Summary of Contents for DT-400




































































Search results

Summary of Contents for DT-400

Reviews:

Related manuals for DT-400

Brands by name

Popular brands

Sharp DT-400, Owner'S Manual

Search results

Summary of Contents for DT-400

Reviews:

Related manuals for DT-400

Brands by name

Popular brands