E-7
2009 September 17
DK-AP7P_A6_09 EN.fm
ENGLISH
DK-AP7P
Basic Operation
General control
■
To turn the power on
Press the ON/STAND-BY button to turn the power on. The
POWER and E
SOUND
indicator will turn on.
Note:
This unit consumes low current during stand-by mode. However,
please remove the batteries if the unit will not be used for a long
period of time.
■
Volume control
Press the VOL (+ or –) button to increase or decrease the
volume.
POWER indicator will be blinking when the volume reaches
maximum or minimum level.
■
E
SOUND
control
When ON/STAND-BY button is pressed, the E
SOUND
indicator
turns yellowish orange. You are now in the E
SOUND
mode,
where low bass and high frequency are automatically adjusted
according to the volume input.
To turn off E
SOUND
, press the E
SOUND
(TV OUT) button. The
E
SOUND
indicator will go off.
■
Auto Power Off function
If no iPod or iPhone is docked and there is no audio cable
connected to AUX IN terminal, the unit will enter the power
stand-by mode after 5 minutes of inactivity.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode. The POWER indicator will turn off.
2.1
STEREO SPEAKER
BUILT-IN SUBWOOFER
ON/STAND-BY
VOL
–
VOL
+
