Sharp DF-A1U-W, User Manual

Page: 8 / 12

6
Top tips and hints
For trouble free use of your SHARP Aroma Diffuser, follow
the advice in this user manual and the bullet points below:
•
DO NOT block the fan grill as this will cause the mist not to be
emitted correctly.
•
Fill the cup to the maximum water level prior to use and
when being used with the Auto Restart function.
•
Make sure that the lid is always fitted correctly.
Using your new Aroma Diffuser
Before filling your Aroma Diffuser with water, either turn off via
the button on the front or disconnect from the mains supply.
Fill the water cup to the maximum mark indicated. Do you not
exceed the maximum mark as this will cause the Aroma diffuser
not to operate correctly and cause spillage of water.
This Aroma Diffuser is designed to be used with clean water,
ideally this should be distilled water or if this is not available
you can use clean tap water. Once the cup has been filled to the
maximum level essential oils can be added to the water. Be sure
to follow the essential oil instructions to ensure that the correct
amount is used.
(Refer to the 2 Water Level Mark on page 1).
Replace the lid, ensuring that it is correctly aligned and fitting
snugly into the base of the unit. If the lid is not installed
correctly there will be a gap between it and the base which will
allow water to drip down the side of the unit. If the lid does not
fit correctly rotate and try again.
(Refer to the 3 Correct Fitment of Lid on page 1).
Once the lid has been correctly fitted, it is possible to turn
on the unit. To do this press the on off button located on
the side. The unit will power up and the LED will be at full
brightness.
Connecting power to your Aroma Diffuser
Your new SHARP of Aroma Diffuser works with an external AC
adapter. It is important that this AC adapter is kept away from
any water and is not operated or touched if your hands are wet.
Your AC Adaptor plugs into the mains supply and then is
connected to the Aroma Diffuser via the power cable, This
lead has moulded connectors on each end; the USB connector
plugs into the AC Adaptor; the round plug fits into the Aroma
Diffuser.
DO NOT use any other AC adapter or lead with your Aroma
Diffuser as this may cause overheating and potentially
hazardous conditions. DO NOT use USB power extension cables
as these may cause the voltage to drop and result in the Aroma
Diffuser working incorrectly.
(Refer to the
4
Connecting to the AC Adapter
on page 2).
When connecting to the AC adapter ensure that the socket and
plug fit securely together before plugging the AC Adaptor into
the mains supply. Loose fitting plugs will cause either erratic or
no operation.
Ensure that the water level is filled to the maximum level before
use; the maximum level is marked clearly inside the cup and
must not be exceeded.
Auto restart function
Your SHARP Aroma Diffuser has a unique feature whereby it
will turn on automatically whenever the supply is connected.
This handy feature allows you to use the unit with a smart plug
enabling remote control operation.
(Refer to the 5
Connecting your Aroma Diffuser via a Smart
Plug
on page 2).
The Auto Restart function will not work if the water level is too
low. Ensure that before using this advanced feature that the
water is at the maximum level and that, if necessary, there is oil
in the device.
When using the Auto Restart function, ensure that the lid is
fitted correctly and securely before doing so. If the lid is not
fitted correctly, water may spill out of the unit.