Sharp CV-13NH, Installation And Operation Manual

Page: 24 / 60

E-22
1
Press the MEGA COOL button during cooling
mode.
• The remote control will display " " .
• The temperature display will go off.
• The green MEGA COOL lamp on the unit will light.
TO CANCEL
Press the MEGA COOL button again.
• MEGA COOL operation is also cancelled when the
mode is changed, or when the unit is turned off.
• The green MEGA COOL lamp on the unit will turn
off.
MEGA COOL OPERATION
In this operation, the air conditioner fan works at extra high speed with a setting
temperature of 59°F.
1
1
When SLEEP operation is set, the temperature setting is automatically adjusted to
prevent the room from becoming too cold and the speed of the fan becomes lower.
SLEEP OPERATION
NOTES:
• You cannot set the temperature or fan speed during MEGA COOL operation.
• The fan returns to the HIGH speed setting after the unit has run for 30 minutes in MEGA
COOL mode.
• The extra high fan speed may automatically slow down to protect the unit.
• SLEEP operation and MEGA COOL operation can not be used together.
1
Press the SLEEP button during cooling
mode.
• The remote control displays “ ”.
• The orange TIMER lamp on the unit will light.
• The unit will stop operating after
8 hours.
• The fan speed setting is set to AUTO.
TO CANCEL
Press the SLEEP button.
• The orange TIMER lamp on the unit will turn off.
• SLEEP operation is also cancelled when the mode
is changed, or when the unit is turned off.
Start of
SLEEP operation Unit shuts off
2 ˚ F
2 ˚ F
1hour
8hours
1hour
NOTES:
• One hour after the SLEEP operation is started, the
temperature setting rises by 2 ˚ F and after another
hour it rises by an additional 2 ˚ F. Temperature display
on the remote control will not change from its original
setting.
• SLEEP operation and MEGA COOL operation can
not be used together.
• The OFF TIMER, ON TIMER and SLEEP operation
can not be set together.
Only the most recent settings will be used.