background image

03/12/18

XL-S10(U)2.fm

13

XL-S10

TINSEA018SJZZ

Ba

sic Ope

ration

Setting the clock

This may be operated only with the remote control.
In this example, the clock is set for the 12-hour (AM 12:00) display.

To confirm the time display:

Press the CLOCK button.
The time display will appear for about 5 seconds.

Note:

The "AM 12:00" or time will flash when the AC power supply is
restored after a power failure or unplugging the unit.
Readjust the clock as follows.

To readjust the clock:

Perform "Setting the clock" from the beginning.

To change the 12-hour or 24-hour display:

1

Press the CLOCK button and within 5 seconds, press the
MEMORY button.

2

Within 1 minute, press the PRESET (  or  ) button to se-
lect 12-hour or 24-hour display and then press the MEMO-
RY button.

"AM 12:00"

The 12-hour display will appear.

 

(AM 12:00 - PM 11:59)

"0:00"

The 24-hour display will appear.

 (0:00 

23:59)

Note that this can only be set when the unit is first installed or it 
has been reset. (Refer to "Clearing all the memory (reset)" on 
page 28.)

3

Within 1 minute, press the PRESET (  or  ) button to ad-
just the hour and then press the MEMORY button.

When the 12-hour display is selected, "AM" will change auto-
matically to "PM".

4

Within 1 minute, press the PRESET (  or  ) button to ad-
just the minutes and then press the MEMORY button.

The clock starts from "0" second. (Seconds are not displayed.) 

1

Clear all the programmed contents. [Refer to "Clearing all the 
memory (reset)" on page 28 for details.]

2

Perform "Setting the clock" from the beginning.

3

Summary of Contents for CP-S10
































Reviews: