05/10/11
HT-M750H(H)E2.fm
E-20
ENGLISH
TINSZA075SJZZ
HT-M750H
8
Prepar
ation for
Use
Connecting to a TV with a video input socket:
If your TV is equipped only with a video input socket (without
SCART), connect a video cable (not supplied) to enjoy images.
Connecting the AC power lead
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket.
Note:
Unplug the AC power lead from the wall socket if the unit will not be
in use for a prolonged period of time.
To turn the power on
Press the ON/STAND-BY button.
If the power does not turn on, check if the AC power lead is plugged
in properly.
To set the unit to stand-by mode:
Press the ON/STAND-BY button again.
Set the video output mode to "S-Video". For the procedure, refer to
"Changing the initial setting of DVD" on pages 55, 56.
Notes:
z
Change the TV input in accordance with the connected socket.
z
Do not connect other equipment (VCR, etc.) between the TV and
the main unit. Images may be distorted.
z
Refer to the operation manual of the equipment to be connected.
z
Insert the plugs fully to avoid fuzzy pictures or noise.
TV
To video
input socket
To video
output socket
Video signal
Video cable
(commercially available)
Wall socket
(AC 230 V, 50 Hz)
