E-53
HTCN410DVH 8_E2.fm
03/10/29
ENGLISH
F
S
V
I
N
P
E
E
HT-CN410DVH
References
- Specifications -
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
General
Amplifier (HT-CN410DVH)
DVD player
Tuner
Front speakers
Power source
AC 230 V, 50 Hz
Power consumption
Power on: 45 W
Power stand-by: 0.6 W
Dimensions
Width: 428 mm
Height: 55 mm
Depth: 360 mm
Weight
3.8 kg
Audio input terminals
Analogue input (IN 1): RCA type
×
1 pair (L/R)
Analogue input (IN 2): RCA type
×
1 pair (L/R)
Audio output
terminals
Analogue output (OUT): RCA type
×
1 pair (L/R)
Headphones: 16-50 ohms (recommended: 32 ohms)
Digital output: Coaxial type
×
1
Video output
terminals
S-video output: S-terminal
×
1
Video output: RCA type
×
1
Component video output: P
R
, P
B
, Y
Audio and Video
output terminals
SCART output: SCART terminal
×
1
Output power
Front speakers:
RMS: 42 W (21 W + 21 W) (10 % T.H.D., 1 kHz)
Centre speaker:
RMS: 21 W (10 % T.H.D., 1 kHz)
Surround speakers:
RMS: 42 W (21 W + 21 W) (10 % T.H.D., 1 kHz)
Subwoofer:
RMS: 45 W (10 % T.H.D., 100 Hz)
Signal system
PAL/NTSC colour
Supported disc types
DVD (with the same region number on the back of the unit
or ALL), SVCD, VCD, audio CD, CD-R, CD-RW, MP3
Video signal
Horizontal resolution: 525 lines
S/N ratio: 56 dB
Audio signal
Frequency characteristics
Linear PCM DVD:
20 Hz to 20 kHz
(sampling rate: 48 kHz)
20 Hz to 20 kHz
(sampling rate: 96 kHz)
CD: 20 Hz to 20 kHz
S/N ratio
CD: 65 dB (1 kHz)
Dynamic range
Linear PCM DVD: 95 dB
CD: 94 dB
Total harmonic distortion
ratio
0.2 % maximum
Frequency range
FM: 87.5 - 108 MHz
AM: 531 - 1602 kHz
Type
Full range speaker system (magnetic shield)
7 cm speaker
Maximum input power
30 W
Impedance
4 ohms
Dimensions
Width: 90 mm
Height: 110 mm
Depth: 100 mm
Weight
0.46 kg/each
