Sharp CP-CN400WC Operation Manual Download Page 48

Page: 48 / 52

E-47

HTCN400_500DVW_E.fm

03/10/29

HT-CN400DVW

ENGLISH

92LCN500W0270

HT-CN500DVW

- T

roub

ooting c

rt -

Troubleshooting chart

Many potential problems can be resolved by the owner without calling a service tech-
nician.
If something is wrong with this product, check the following before calling your autho-
rised SHARP dealer or service centre.

General

DVD player

Symptom

Possible cause

Reference

page

No sound is heard.

Is the volume level set to "0"?

P. 22

Are the speaker wires disconnect-
ed?

P. 11

The sounds from speakers
are not well balanced.

Are the speaker leads connected to
the wrong channels?

P. 11

Is each speaker placed at the same
distance from the listener?

P. 15

Are speakers adjusted to the same
level?

P. 44

Noise is heard during play-
back.

Move the unit away from any com-
puters or mobile phones.

When a button is pressed,
the unit does not respond.

Set this unit to the power stand-by
mode and then turn it back on.

P. 48

Interference or noise occurs
on the TV image.

Is the unit placed near TV with inter-
nal aerial? Use an external aerial.

P. 12

The power is not turned on.

Is the unit unplugged?

P. 14

The protection circuit may be acti-
vated. Unplug and plug in the power
lead again after 15 minutes or more.

P. 48

No images are displayed.

Is TV turned on?

P. 17

Is the input of TV switched?

P. 17

Symptom

Possible cause

Reference

page

Even though a disc has been
loaded, "NO DISC" is dis-
played.

Is the disc loaded upside down?

Is the disc very dirty?

Playback sounds are
skipped.

Does the disc satisfy the standards?

Is the unit located near excessive vi-
brations?

Has condensation formed inside the
unit?

P. 48

The control buttons do not
function. Music or video play-
back is interrupted.

Is the disc very dirty?

Does the disc satisfy the standards?

Is the unit located near excessive vi-
brations?

Has condensation formed inside the
unit?

P. 48

Pictures and sound are
skipped.

Is the disc very dirty?

Is the unit located near excessive vi-
brations?

Has condensation formed inside the
unit?

P. 48

The unit does not operate
even if the power is on.

Is a disc other than a DVD (region
number on the back of the unit or
ALL), SVCD, VCD, audio CD, CD-R
or CD-RW loaded?

P. 3

Image cannot be played
back. (Sound is not heard.)

Are the video and audio cables con-
nected improperly?

P. 13 - 14

Is a disc other than a DVD (region
number on the back of the unit or
ALL), SVCD, VCD, audio CD, CD-R
or CD-RW loaded?

P. 3

Is the disc very dirty?

Is the disc loaded upside down?

Clean the optical pickup if it is dirty.

Is the TV input set to "VIDEO 1/VID-
EO 2", etc.?

P. 23

Is the unit turned on?

P. 16

Summary of Contents for CP-CN400WC





















































Search results

Summary of Contents for CP-CN400WC

Reviews:

Related manuals for CP-CN400WC

Brands by name

Popular brands

Sharp CP-CN400WC, Operation Manual

Search results

Summary of Contents for CP-CN400WC

Reviews:

Related manuals for CP-CN400WC

Brands by name

Popular brands