79
Appendix
Attaching the Ceiling Mount to the Ceiling
When installed with the
AN-TK201
1
Attach the ceiling mount to the
ceiling.
First, lightly screw an installation bolt into
the smallest hole
and then proceed,
doing the same for the holes
,
and
.
Once the position has been decided, fi rmly
tighten all four bolts.
Use M8-type bolts. (Bolt type may vary
depending on the method of installation.)
Use
the washers supplied with the
ceiling mount.
2
Attach the height-adjustment
pole to the ceiling mount.
Insert the height-adjustment pole
into
the ceiling mount.
Fix the pole in place with the sleeve and
pole-fi xing bolt
, according to the height
of the screen.
Lock the bolt in place with the securing
nut
.
Screw in the two stabilizing screws
.
Tighten the securing nut
fi rmly and fi t
the pin
into the hole on the pole-fi xing
bolt.
Caution
Ask your dealer or service shop to install the
ceiling mount. Sharp will assume no
responsibility whatsoever if inadequate
installation causes your projector or attached
devices to fall out of place.
•
•
•
1.
2.
3.
4.
5.
•
1
Washer
Mounting bolt (M8-type)
Washer
Mounting bolt (M8-type)
2
Pin hole
Sleeve
Pin hole
Sleeve
Summary of Contents for Conference Series
Page 92: ......
