Sharp Conference Series, Operation Manual

Page: 39 / 92

35
Basic
Operation
Adjusting the Volume
Press VOL + / – on the remote control
or on the projector to adjust the
volume.
Pressing VOL– will lower the volume.
Pressing VOL+ will raise the volume.
When the projector is connected to external
equipment, the volume level of the external
equipment changes in accordance with the
volume level of the projector. Set the projector's
volume to the lowest level when turning the
projector on/off or when changing the input signal.
When you do not want to output the sound
from the projector's speaker while the
projector is connected to external equipment,
set “Speaker” in the “Audio” menu to “Off”.
(See page
51 .)
•
•
•
•
Note
Displaying the Black Screen
and Turning Off the Sound
Temporarily
Press AV MUTE on the remote control
to temporarily display a black screen
and turn off the sound.
Pressing AV MUTE again will turn the
projected image back on.
•
Note
On-screen display On-screen display
On-screen display On-screen display
VOL +/– (Volume)
buttons
AV MUTE button