9
CD-XP250E(E)1.fm
02/5/30
CD-XP250E
Prepar
ation for Us
e
- S
y
s
te
m
c
onne
c
tion
s
-
System connections
!
Removing the transport screw
Before turning the power on, be sure to remove the transport screw
on the back of the unit using a flat head screwdriver or a coin.
Note:
This screw is required when transporting the unit again. Please keep it (see page
26).
!
Aerial connection
Note:
Placing the aerial on the stereo system or near the AC power lead may cause noise
pickup. Place the aerial away from the stereo system for better reception.
Installing the AM loop aerial:
External FM aerial:
Use an external FM aerial if you require better reception. Consult your dealer.
AM loop aerial
Surround speaker
(Left)
Front speaker
(Right)
Surround speaker
(Right)
Transport screw
Front speaker
(Left)
Wall socket
(AC 230 V, 50 Hz)
FM aerial
Supplied FM aerial:
Connect the FM aerial wire to the FM 75
OHMS socket and position the FM aerial wire
in the direction where the strongest signal can
be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP
socket. Position the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
< Assembling >
< Attaching to the wall >
Wall
Screws
(not
supplied)
External FM aerial
