manualshive.com logo in svg

Sharp CD-G7500DVD, Operation Manual

Share
Download
Sharp CD-G7500DVD Operation Manual Download Page 66

E-65

ENGLISH

T

ape Recording

CD-G7500DVD (S)
TINSZA159AWZZ

CD-G7500DVD
CP-G7500

H

Dubbing from tape to tape

You can record from TAPE 1 to TAPE 2.

1

Press the ON/STAND-BY button to turn the power on.

2

Load a prerecorded cassette into the TAPE 1 cassette
compartment. Insert a blank tape into the TAPE 2 cassette
compartment.

It is recommended that the recording tape is the same length as the
master tape.

3

Press the TAPE (1 

V

 2) button

until  “TAPE 1” appears on the
display.

The reverse mode will be set to “ ”.

4

Press the 

I6

 button.

Recording will be paused.

5

Press the 

0

 button to start dubbing.

To stop dubbing:

Press the 

H

 button.

TAPE 1 and TAPE 2 will simultaneously stop.

H

Erasing recorded tapes

1. Load the tape to be erased into the TAPE 2 cassette compartment with the

side to be erased facing toward you.

2. Press the TAPE (1 

V

 2) button until “TAPE 2” appears on the display.

3. Set the 

 button to “ ” to erase only one side and to “

” to erase both

sides.

4. Press the 

I6 

button.

5. Press the 

0

 button to erase side A, or the 

1 

button to erase side B.

To erase both sides, begin with side A. (If erasing is started from side B, the
tape will not switch over to side A.)

Note:

Make sure that the TAPE 1 is not in use.

Recording to a cassette tape (continued)

1

2

3

4

5

6

7

8

9

SHARP  

TINSZA159A

WZZ

 (S)

10

*CD-G7500DVD(EN)60-65

05.1.13, 14:45

65

Summary of Contents for CD-G7500DVD
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands