manualshive.com logo in svg

Sharp CD-G7500DVD, Operation Manual

Share
Download
Sharp CD-G7500DVD Operation Manual Download Page 49

E-48

ENGLISH

V

ideo CD/CD Playback

CD-G7500DVD (S)
TINSZA159AWZZ

CD-G7500DVD

CP-G7500

7

CD playback

This system can also play audio CD-R and CD-RW discs, but cannot record.
Some audio CD-R and CD-RW discs may not be playable due to the state of
disc or the device that was used for recording.

CD-G7500DVD

DV D MINI SYSTEM

5

-DISC

GHANGER

DV

D/C

D

H

CD playback

1

Press the ON/STAND-BY button to turn the power on.

2

Press the DVD/CD button.

3

Press the 

s 

1 button and within 5 seconds, press the OPEN/

CLOSE button to open the disc tray 1.

4

Place the CD on the disc tray 1, label side up.

I

Be sure to place 8 cm (3") discs in the middle of the disc positions.

5

Press the OPEN/CLOSE button to close the disc tray 1.

“

” will appear.

6

You can place discs on the trays 2 - 5 by following steps
3 - 5.

7

Press the 

0

 button to start playback.

12 cm (5

"

)

8 cm (3

"

)

CD play indicator

Total number of tracks on
the CD whose number is
flashing

Total playing time of the
CD whose number is
flashing

*CD-G7500DVD(EN)45-48

05.1.13, 14:43

48

Summary of Contents for CD-G7500DVD
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands