10
(Continued)
■
Demo mode
When the AC power lead is first connected, the unit will enter
the demonstration mode.
To cancel the demonstration mode:
When the unit is in the stand-by mode (demonstration mode),
press the X-BASS/DEMO button.
●
The demonstration mode will be cancelled and the unit will
be in the low power consumption mode.
To return to the demonstration mode:
When the unit is in the stand-by mode, press the X-BASS/DEMO
button again.
Notes:
●
When the unit is in the low power consumption mode, the
display will disappear.
●
When the power is on, the X-BASS/DEMO button can be
used to select the extra bass mode.
(Main unit operation)
(Main unit operation)
When bright
When dark
0.2 m - 6 m
(8" - 20’)
●
2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar)
●
Batteries are not included.
■
Remote control
●
When inserting or removing the batteries, push them towards
the
ë
battery terminals.
●
Installing the batteries incorrectly may cause the unit to
malfunction.
Precautions for battery use:
●
Insert the batteries according to the direction indicated in
the battery compartment.
●
Replace all old batteries with new ones at the same time.
●
Do not mix old and new batteries.
●
Remove the batteries if they are weak or if the unit will not
be used for long periods of time. This will prevent potential
damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery,
etc.).
Notes concerning use:
●
Replace the batteries if the operating distance is reduced or
if the operation becomes erratic.
●
Periodically clean the transmitter LED on the remote con-
trol and the sensor on the main unit with a soft cloth.
●
Exposing the sensor on the main unit to strong light may
interfere with operation. Change the lighting or the direction
of the unit.
●
Keep the remote control away from moisture, excessive heat,
shock, and vibrations.
■
To change the brightness of the display
Press the DIMMER button.
●
The display will be made dimmer.
To return to the original brightness:
Press the DIMMER button again.
http://www.usersmanualguide.com/
