Sharp BD-HP50U - AQUOS Blu-Ray Disc Player, Operation Manual

Page: 31 / 51

p
Disc Playback
29
Partial Repeat Playback
(Repeat Playback of a
Specified Part)
DVD VIDEO DVD-R DVD-RW
AUDIO CD
NOTE
Some operations in the following playback
function cannot be performed depending on the
specifications of the disc. •
Press REPEAT during playback.
Press
c
/
d
to select “SCENE
SELECTION”, then press ENTER .
PLAYBACK CHAPTER PLAYBACK TITLE SCENE SELECTION
SET START POINT
“SET START POINT” displays.
Press
ENTER
at the scene where
you want.
“SET END POINT” displays.
Press ENTER at the scene where
you want to set the end point.
You can press V
FWD
to fast forward
to the scene where you want to set the
end point. When you reach the desired
scene, simply press
I
PLAY and then
ENTER to set the end point. To cancel
Repeat Playback, press REPEAT- OFF
or
REPEAT
.
NOTE
Press L
SKIP/
l
, the Repeat Playback is
cancelled and the next chapter being play back.
Press
K
SKIP/
k
once, the Repeat Playback
is cancelled and the player returns to the start of
current chapter (track).
If you press
K
SKIP/
k
again (within about 5
seconds) the player will skip to the beginning of the
previous chapter (track).
For Partial Repeat Playback, set the start and end
points within the same title.
Repeat Playback may be forbidden depending on
the disc.
Partial Repeat Playback may not work in multi-
angle scenes.
If you press
DISPLAY , you can confirm the Repeat
Playback status.
•
•
•
•
•
•
•
1
2
3
•
4
•
Switching Audio
You can change the audio output channel using
AUDIO .
Each time AUDIO is pressed, the audio
channels change as follows:
DVD VIDEO BD VIDEO
The audio track currently being played back will
be displayed.
DVD-RW DVD-R
When a recorded broadcast with stereo or
monaural audio is played back:
“Stereo” is displayed. (Audio cannot be
switched.)
NOTE
When you play a program recorded in stereo
or monaural, and if you are listening to the
BITSTREAM sound via the digital output jack, you
cannot select the audio channel. Set “AUDIO OUT”
to “PCM” (Page 35), or if you want to change the
audio channel, listen via the analog output jacks. •
Switching Subtitles
If subtitles are provided in multiple languages,
you can switch between them.
Press
SUBTITLE
during playback.
The display indicates the subtitle number
currently being played back, and the subtitles
appear.
Each time
SUBTITLE is pressed, the
subtitles change.
“– –” is displayed if a disc has no subtitles.
You can also select “OFF”.
•
•
•
Playback Functions
BD-HP50U_en.indd 29 BD-HP50U_en.indd 29 2008/07/17 19:58:26 2008/07/17 19:58:26