GB-7
ENGLISHENGLISH
VERTICAL AIR FLOW DIRECTION
1
Press the SWING button ( ).
• The vertical air
fl
ow louvre will swing.
2
Press the SWING button ( ) again
to stop at the desired position.
CAUTION:
Never attempt to adjust the louvres manually.
• Manual adjustment of the louvres can cause
the unit to malfunction.
• When the vertical adjustment louvre is posi-
tioned at the lowest position in the COOL or
DRY mode for an extended period of time,
condensation may result.
NOTE:
• The adjustment range is narrower than the
SWING range in order to prevent condensa-
tion from dripping.
HORIZONTAL AIR FLOW DIRECTION
Hold the horizontal air
fl
ow louvre link
and adjust the air
fl
ow direction.
ADJUSTING THE AIR FLOW
DIRECTION
1
2
PLASMACLUSTER OPERATION
The Plasmacluster ion generator inside
the air conditioner will release positive and
negative Plasmacluster ions into the room
to reduce airborne mold.
1
During operation, press the PLAS-
MACLUSTER button.
• The remote control will display “
”.
• The blue PLASMACLUSTER lamp will
light up.
TO CANCEL
Press the PLASMACLUSTER button again.
• The blue PLASMACLUSTER lamp will turn off.
NOTE:
• Use of the PLASMACLUSTER operation will
be memorized, and it will be activated the next
time you turn on the unit.
• To perform Plasmacluster operation in FAN
only mode, press the PLASMACLUSTER but-
ton when the unit is not operating.
The mode symbol of the remote control will go
off and the fan speed cannot be set to AUTO.
• Plasmacluster is Sharp’s original technology.
For more information, please visit:
http://www.sharp-pci.com/en/
1
Louvre lever
A3AYXPC2PH_OPERATION_MANUAL_130105_10_langs.indb GB-7
A3AYXPC2PH_OPERATION_MANUAL_130105_10_langs.indb GB-7
2013-02-07 05:09:59
2013-02-07 05:09:59
