Sharp AY-XP12GHR, Operation Manual

Page: 16 / 136

GB-14
1
Press the TIMER OFF ( ) button.
2
The TIMER OFF indicator will blink; press
the TIME ADVANCE or REVERSE buttons to
set the desired time. (The time can be set in
10-minute increments.)
3
Point the remote control at the signal receiver
window on the unit and press the TIMER SET
(SET/C) button.
• The orange TIMER lamp ( ) on the unit will
light.
• The unit will generate a beep when it receives the
signal.
NOTE:
Before setting the timer, make sure the clock is properly set with the current time.
TIMER OPERATION
TIMER OFF
Cancel the TIMER setting fi rst, then set it
again.
Press the TIMER CANCEL (SET/C) button.
• The orange TIMER lamp ( ) on the unit will
turn off.
• The current clock
time will be displayed
on the remote con-
trol.
NOTE:
• If any TIMER ON, TIMER OFF and 1-HOUR
OFF TIMER are set, the TIMER CANCEL but-
ton cancels all settings.
When the TIMER OFF mode is set,
the temperature setting is automati-
cally adjusted to prevent the room from
be coming excessively hot or too cold
while you sleep. (Auto Sleep function)
COOL/DRY MODE:
• One hour after the time operation begins,
the temperature setting rises 1°C higher
than the original temperature setting.
HEAT MODE:
• One hour after the timer operation begins,
the temperature setting drops 3°C lower
than the original thermostat setting.
2
3
1
SWING
CLEAN
FAN
MODE
SET/C
1h
DISPLAY
SWING
CLEAN
FAN
MODE
SET/C
1h
TIPS ABOUT TIMER OFF OPERATION
TO CANCEL TIMER MODE
TO CHANGE TIME SETTING
AY-XPM7̲9̲12FR.indb GB-14 AY-XPM7̲9̲12FR.indb GB-14 2010/04/27 9:03:30 2010/04/27 9:03:30