E – 23
OTHER CONVENIENT FEATURES
Back/Info
provides 7 features and step-by-step
instructions for special functions.
These features can be selected by pressing
Back/Info
in home page (displayed ENERGY SAVE MODE) and
then turning the
Knob
and pressing
Enter
.
D R A I N W A T E R
The remaining water inside the steam generator can
be evaporated by using the DRAIN WATER function.
See page E-8.
D E S C A L E
See page E-8.
S T E A M C L E A N
See page E-24.
C O N T R A S T
Contrast can adjust display darkness or brightness.
D E M O N S T R A T I O N M O D E
Cooking operations and special features can be
demonstrated with no power in the oven.
NOTE:
1. To cancel Demonstration Mode, select DEMO OFF
at step 2 or unplug the oven from the electrical outlet
and re-plug. "ENERGY SAVE MODE" will be
displayed.
2. If you set Demo Mode, energy save mode will be
cancelled.
1
Turn the
Knob
to select DEMO ON and press
Enter
.
2
Press
Back/Info
, turn the
Knob
to select DEMO
MODE and press
Enter
.
CHILD LOCK
Child Lock prevents unwanted oven operation such as
by small children. The oven can be set so that the control
panel is deactivated and locked.
NOTES:
1. To cancel Child Lock, press
Enter
and hold for 3
seconds.
2. If you set Child Lock, energy save mode will be
cancelled.
3. When the oven power is off, the setting returns to
OFF.
1
Press
Enter
.
2
Press
Back/Info
, turn the
Knob
to select CHILD
LOCK and press
Enter
.
1
Turn the
Knob
to adjust contrast and press
Enter
to keep the adjustment.
The contrast setting will be held in the memory
even if the oven power is off.
2
Press
Back/Info
, turn the
Knob
to select
CONTRAST and press
Enter
.
WATER HARDNESS
Your oven is set at the factory to water hardness setting
3 (Very hard). You can set the oven for the water
hardness level.
You can use the test strip supplied to check the water
hardness level.
HOW TO USE THE TEST STRIP SUPPLIED:
1. Put the test strip into the water you want to use for 1
second, then remove it.
2. Shake off excess water.
3. Wait 15 seconds, and compare colour change on
the test strip to colour chart and the table below.
When you use other test strips, follow the instructions
of them.
Info
SETTINGS
CONTRAST
CHILD LOCK
DEMO MODE
WATER HARDNESS
MAINTENANCE
DRAIN WATER
DESCALE
STEAM CLEAN
Hardness range
<120 ppm
<120 mg/l
<6.7 °dH
120 - 250 ppm
120 - 250 mg/l
6.7 - 14.0 °dH
>250 ppm
>250 mg/l
>14.0 °dH
Setting
Soft
Hard
Very hard
Hardness level
1
2
3
1
Turn the
Knob
to select desired hardness level
and press
Enter
.
The water hardness setting will be held in the
memory even if the oven power is off.
2
Press
Back/Info
, turn the
Knob
to select
WATER HARDNESS and press
Enter
.
PROCEDURE
PROCEDURE
PROCEDURE
PROCEDURE