manualshive.com logo in svg

Sharp AV18P - Actius - Athlon XP-M, Operation Manual

Share
Download
Sharp AV18P - Actius - Athlon XP-M Operation Manual Download Page 77

 

5-2

 

5 

 

Connecting Modem to Telephone Line 

1. 

Turn off your computer.  

2. 

Open the cover of the modem jack on the left side of your computer. 

                                

 

 

 

To avoid damaging the modem, close the modem cover after you finish 
using the built-in modem. 
 

 
3. 

Connect one end of the included modem cable to the modem jack and the other 
to the telephone line. 

 

 

 

Be sure not to insert the modem cable into the LAN jack. It may damage 
the LAN jack and the modem cable.

 

                
4. 

Turn on your computer.  

 

 

Connect the modem to the telephone line directly. Do not use a 
distributor or allotter. 
 

 
 

Modem Jack 

To Telephone Line 

Modem

 

Cover

 

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

Summary of Contents for AV18P - Actius - Athlon XP-M

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands