Sharp AV18P - Actius - Athlon XP-M Operation Manual Download Page 117

Page: 117 / 128

rou
bleshoo

ting

T-6

Question: Why the drive does not open?

•

Confirm the optical drive unit is correctly installed to your computer.

•

Confirm your computer is turned on.

•

When your computer is turned off, insert a fine rod into the drive tray ejection hole.

Question: Why can’t I read data from a disk or play files?

•

Confirm your computer is turned on.

•

Confirm the disk is inserted correctly.

•

Confirm the drive and file names are correct.

•

Confirm the disk is not stained or scratched.

•

Confirm the disk or files are supported.

Question: Why doesn’t a DVD video play smoothly?

•

Ensure to use AC power.

•

Power management may be working. Disable it.

Question: Why isn’t the optical drive recognized?

•

If your computer is turned on with a certain DVD video inserted in the drive, the
drive may not be recognized. In this case, turn off your computer and open the disk
tray by the way on

Question: Why does not the drive open?

on the previous page.

Remove the DVD video from the drive; then turn on your computer again.

Downloaded from

www.Manualslib.com

manuals search engine

Summary of Contents for AV18P - Actius - Athlon XP-M

































































































































Search results

Summary of Contents for AV18P - Actius - Athlon XP-M

Reviews:

Brands by name

Popular brands

Sharp AV18P - Actius - Athlon XP-M, Operation Manual

Search results

Summary of Contents for AV18P - Actius - Athlon XP-M

Reviews:

Brands by name

Popular brands