B. Bin removal
When removing the bin of this machine, remove the bin roller. If,
however, it is removed twice or more, the strength will be decreased
and it must be replaced. For replacement of first bin to 13th bin,
replace from the top. For replacement of the lower bins, replace from
the bottom.
1. Replacement of bins from the top
1) Remove the bin unit from the sorter and lay it on a work table.
2) Remove the two screws (2) and remove the accuride rail (1).
3) Remove the three screws on the front and the four screws on the
rear, and remove the bin front cover (3).
4) Remove the four screws (5) and remove the bin upper cover (4).
5) Remove the spring (7) and the screw (8), and then remove the
guide bar holder (5).
6) Remove the bin roller stopper (9) and the bin roller (10), and
remove the bin.
2. Replacement of bins from the bottom
1) Remove the screw (2) of the bin lower unit cover (1), and then
remove the bin lower unit cover.
2) Remove the tie lap (3) and two connectors (4).
3) Pull out the sensor wiring (5) in the arrow direction.
1
2
3
4
5
6
7
8
8
1
2
3
4
5
AR-SS2
4 – 2
