14
Using the Control Panel
T
O
AR-P15
PAGES
FROM
THE
C
ONTROL
P
ANEL
LCD
1.
Take the AR-P15 offline, as described on page 11.
Touch the UTILITY tab on the Control Panel LCD.
2.
Touch the TEST PRINTING icon on the Control Panel LCD.
3.
Touch the icon for the particular page to be printed: Setting List, Fonts List, PCL Test,
PS Test, Storage List, or Print Log.
N
OTE
:
The PS Test page icon appears only if the PostScript option or HDD option is
installed.
4.
Examine the PCL Test Page (and PS Test Page, if available).
If the PCL (or PS) Test Page prints, you know the AR-P15 print engine is functional and
the connection between the AR-P15 and the copier is operating properly. When you
examine the PS Test Page, keep in mind that:
• All swatches should be visible, even though they may be very faint in the lowest ranges.
• Swatches should show uniform gradation as the tone lightens.
• Poor image quality may indicate a need to calibrate the system or service the copier.
5.
Post the current Setting List near the server for quick reference.
Users may need the information on this page.
6.
Put the copier back online, as described on page 12.
If the AR-P15 is not connected to the network yet, proceed to page 15 to connect and
verify the AR-P15 connection to the network.
UTILITY tab
