8
Restoring functionality after service
Restoring functionality after service
To complete any service procedures performed on the AR-P15, install the AR-P15 inside
the copier, as described in the AR-P15 installation instructions (not provided in this
guide) and verify it is working properly. To verify the installation, check the connections
of the AR-P15, first to the copier and then the network, and the parallel port.
T
O
REASSEMBLE
AND
VERIFY
THE
AR-P15
1.
Reseat any boards, cables, connectors, and other parts of the AR-P15 you loosened or
removed during inspection or service.
2.
Install the AR-P15 in the copier and reassemble the copier as described in the AR-P15
installation instructions (not provided in this guide).
3.
If you replaced the optional HDD, reinstall system software according to the procedure in
“System Software” on page 18.
4.
Before you leave the customer site, verify AR-P15 operation, as described in the
following flow diagram.
F
IGURE
E
AR-P15 connection verification steps
Power up and print test pages
(see page 13).
Check the AR-P15 settings. For more
information on setting up the AR-P15,
see the
Administrator’s Guide
.
Connect the AR-P15 to the network
and/or parallel port and verify (see
page 15 and/or page 16).
