manualshive.com logo in svg

Sharp AR-M355N, Operation Manual, Page: 19 / 380

Share
Download
Sharp AR-M355N Operation Manual Download Page 19

PART NAMES AND FUNCTIONS

1-10

Interior

(14) Duplex module side cover

Open when a misfeed has occurred in the duplex
module.

(15) Side cover latch

Push up to open the side cover when a misfeed
has occurred in the main unit.

(16) Fusing unit

Lift up to open the side cover when a misfeed has
occurred in the main unit.

(17) Toner cartridge (drum/toner cartridge)

The toner cartridge must be replaced when
indicated on the operation panel. (See page 2-15)

(18) Photoconductive drum

Images are formed on the photoconductive drum.

(19) Cartridge lock lever

When replacing the drum, toner or developer
cartridge, turn down this lever and pull it out.

(14)

(15)

(16)

(17)

(18)

(19)

CAUTION

The fusing unit is hot. Take care in removing misfed
paper.

NOTE

Do not touch or damage the photoconductive drum.

Summary of Contents for AR-M355N





























































































































































































































































































































































































Reviews:

No comments