manualshive.com logo in svg

Sharp AR-FX12, Facsimile Operation Manual, Page: 37 / 110

Share
Download
Sharp AR-FX12 Facsimile Operation Manual Download Page 37

3-1

CHAPTER 3

USING CONVENIENT FUNCTIONS 1

ADVANCED TRANSMISSION METHODS

This chapter explains convenient functions for sending faxes. Please
read those sections that are of interest to you.

Page

SENDING THE SAME DOCUMENT TO MULTIPLE DESTINATIONS IN
A SINGLE OPERATION (BROADCAST TRANSMISSION) ................... 3-2

USING BROADCAST TRANSMISSION ......................................... 3-3

ERASING EDGE SHADOWS (EDGE ERASE) ...................................... 3-4

USING EDGE ERASE .................................................................... 3-4

FAXING A DIVIDED ORIGINAL (DUAL PAGE SCAN)........................... 3-5
AUTOMATIC TRANSMISSION AT A SPECIFIED TIME (TIMER
TRANSMISSION) ................................................................................... 3-6

SETTING UP A TIMER TRANSMISSION....................................... 3-6

TRANSMITTING TWO ORIGINAL PAGES AS A SINGLE PAGE (2in1) .... 3-7

USING 2in1..................................................................................... 3-7

FAXING THE FRONT AND BACK SIDES OF A CARD ON ONE SHEET OF
PAPER (CARD SHOT) ............................................................................... 3-8

USING CARD SHOT....................................................................... 3-8

FAXING A LARGE NUMBER OF PAGES (JOB BUILD MODE) ............ 3-10
OWN NUMBER SENDING ..................................................................... 3-11
PRINTING OUT THE RESULT OF A TRANSMISSION (TRANSACTION
REPORT)................................................................................................ 3-12
TRANSMISSION AND RECEPTION USING THE POLLING FUNCTION ... 3-13

USING THE POLLING FUNCTION ................................................ 3-14
USING POLLING MEMORY ........................................................... 3-15

PROGRAMMING FREQUENTLY USED OPERATIONS ....................... 3-17

USING A PROGRAM...................................................................... 3-17

TRANSFERRING RECEIVED FAXES TO ANOTHER MACHINE WHEN
PRINTING IS NOT POSSIBLE (FORWARDING FUNCTION) ............... 3-18

USING THE TRANSFER FUNCTION............................................. 3-18

FAXING DIRECTLY FROM A COMPUTER (PC-FAX FUNCTION) ....... 3-19

Summary of Contents for AR-FX12















































































































Reviews:

No comments