AR-D21/D22
UNPACKING AND INSTALLATION
– 2 –
Turn off the main switch of the copier and then remove the power
plug of the copier from the outlet.
1. Remove the rear cover from the copier.
Remove the two screws and then remove the rear cover from the
copier.
2. Remove the rear cover from the optional paper feed unit.
Remove the two screws and then remove the rear cover from the
optional paper feed unit.
3. Remove the connector cover.
Remove the cover from the connector.
4. Attach the copier
Place the copier on the optional paper feed unit and remove the second
and third paper trays.
Connect the copier to the paper feed unit using four fixing plates and
two screws (M4 x 12) for each plate.
Rear cover
Screw
Screw
Rear cover
Screw
Screw
Connector cover
Fixing plate
Right of rear side
Screws
(M4 x 12)
Detailed view
Front side
Screws (M4 x 12)
Screws (M4 x 12)
Fixing plate
Fixing plate
Fixing plate
Screws
(M4 x 12)
Left of rear side
