1-4
PART NAMES AND FUNCTIONS
Exterior
Left tray (See page 5-5)
Finished sheets are deposited here.
Left side cover
Open this cover when a paper misfeed occurs in
the fusing unit or the transfer unit.
Reversing automatic document feeder
(See page 4-2)
This automatically feeds originals to be scanned.
The feeder can turn the original over and scan the
back side as well as the front side for support of
two-sided originals.
Power switch
Press to turn power on and off.
Front cover
Open to replace toner cartridge.
Operation panel
Centre tray (See page 5-5)
Finished sheets are deposited here.
Bypass tray
Special papers (including transparency film) and
copy paper can be fed from the bypass tray.
Stand/1 x 500 sheet paper drawer*
(See page 2-7)
Stand/3 x 500 sheet paper drawer*
(See page 2-7)
Duplex module/2 x 500 sheet paper drawer*
(See page 2-8)
Paper tray
Each tray can hold approximately 500 sheets of the
recommended paper for colour (80
g/
m
2
or 21 lbs.),
or approximately 500 sheets of SHARP standard
paper (80
g/
m
2
or 21 lbs.).
Left side cover release
Push this release up to open the left side cover.
Duplex bypass/inverter unit and exit tray*
(See page 1-6)
*
,
,
and
are peripheral devices. For a description of these devices, see page 1-6.
WhaleII_general-copy_EX.book 4
ページ
２００４年９月２２日 水曜日 午後７時５０分
