8
INSTALLING THE SOFTWARE
10
When you are asked how the printer is
connected, select "Connected to this
computer" and click the "Next" button.
11
When the interface selection screen appears,
select "USB" and click the "Next" button.
12
A confirmation window appears. Check the
contents and then click the "Next" button.
13
Click the "Next" button.
In Windows 98/Me, click the "Yes" button.
Begin installation of the printer driver.
14
When "The installation of the SHARP
software is complete" appears, click
the "OK" button.
15
Click the "Close" button.
A message will appear instructing you to
connect the machine to your computer.
Click the "OK" button.
16
Make sure that the power of the
machine is turned on, and then
connect the USB cable. (page 13)
Windows will detect the machine and the
Plug and Play screen will appear.
17
Follow the instructions in the Plug and
Play screen that appears in your
version of Windows to begin the
installation.
This completes the installation of the
software.
After installation, see "CONFIGURING THE
PRINTER DRIVER" (page 14) to check the
printer driver settings.
In Windows 2000, if the following
screen appears while the files are
being copied (the message may
appear more than once), click the
"Yes" button.
Caution
After the installation, a message
prompting you to restart your
computer may appear. In this case,
click the "Yes" button to restart your
computer.
Note
!!install_ar230270.book 8 ページ ２００６年１２月２５日 月曜日 午後２時３８分
