Sharp AR-5625, Online Manual

Page: 29 / 36

3 TROUBLESHOOTING
29
C O N T E N T S
Improper printing operation
(part 1)
Printing is slow
■
Simultaneous use of two or more application
software programs?
Start printing after quitting all unused application software
programs.
■
Is an appropriate print quality selected in the printer
driver?
When the "Print quality" setting in the "Advanced" tab of the
printer driver is "Normal" or "Photo", slow printing may result.
Be sure to select a print quality that is suitable for the
document or image being printed.
Two-sided printing is not possible
■
Is two-sided printing disabled in the key operator
programs?
Enable two-sided printing as explained in "DISABLING OF
DUPLEX" in the key operator's guide.
Stapling is not possible (when a finisher
or a saddle stitch finisher is installed)
■
Is stapling disabled in the key operator programs?
Enable stapling in the key operator programs (see
"DISABLING OF STAPLER" in the key operator's guide).
■
Is the finisher disabled in the key operator programs
(when a saddle stitch finisher is installed)?
Enable the finisher in the key operator programs. (See
"USING THE KEY OPERATOR PROGRAMS" in the
operation manual for the saddle stitch finisher, and
"DISABLING OF STAPLER" in the key operator's guide.)
■
Did you attempt to print more pages than can be
stapled?
When a finisher is installed, up to 30 sheets can be stapled.
When a saddle stitch finisher is installed, up to 50 sheets can
be stapled (up to 25 sheets when the paper size is B4,
Foolscap, or larger).
■
Are pages of different width mixed together in the
print job?
Stapling is not possible when pages of different width are
mixed together in a print job.