Sharp AR-5015 Operation Manual Download

Page: 5 / 61

GETTING ST

ARTED

MAIN FEATURES

High-speed laser copying

●

First-copy time is only 7.2 seconds (except in a power save mode or immediately after power on).

●

Copying speed is 15 copies/min., which adapts to business use, allowing improvement of working efficiency.

High-quality digital image

●

High-quality copying at 600 dpi is performed.

●

In addition to the automatic exposure mode, the manual exposure can be adjusted in five steps.

●

The photo mode copying function allows clear copying of delicate halftone original images such as monochrome
photos and colour photos. Photo mode is adjustable in five steps.

Substantial copying features

●

Zoom copying from 50% to 200% in 1% increments can be performed.

●

Continuous copying of maximum 99 sheets can also be performed.

●

Useful special features such as the XY zoom, black and white reverse, and dual page copy are available.

●

User programs allow setting/modification of functions for customer needs. Also the user programs allow the internal
auditor to be controlled.

Environmentally friendly design

●

Paper output tray is housed in the copier for space saving.

●

Preheat and auto power shut-off modes are provided to reduce power consumption in standby mode.

Main features

Downloaded from:

http://www.usersmanualguide.com/

Summary of Contents for AR-5015






























































Search results

Summary of Contents for AR-5015

Reviews:

Related manuals for AR-5015

Brands by name

Popular brands

Sharp AR-5015, Operation Manual

Search results

Summary of Contents for AR-5015

Reviews:

Related manuals for AR-5015

Brands by name

Popular brands