manualshive.com logo in svg

Sharp AR-205, Operation Manual

Share
Download
Sharp AR-205 Operation Manual Download Page 57

55

GENERAL INFORMA

TION

SPECIFICATIONS

Specifications

Weight

Approx. 36.2 kg (79.9 lbs.)
TD and drum cartridges included

Copier dimensions

590 mm (W) x 531 mm (D) x 523 mm (H)

(without platen cover)

(23-15/64" (W) x 20-29/32" (D) x 20-19/32" (H))

Operating conditions

Temperature: 15°C to 30°C (59°F to 86°F)
Humidity: 20% to 85%

Optional equipment

Single pass feeder (AR-SP2)
Reversing single pass feeder (AR-RP1)
Electronic sorting kit (AR-EB3)
250-sheet paper feed unit (AR-DE5)
2x250-sheet paper feed unit (AR-DE6)
Platen cover (AR-VR1)
Facsimile expansion kit (AR-FX2)
Printer expansion kit (AR-PB8)
PS2 expansion kit (AR-PS1)
LCD panel kit (AR-PA1)
Job separator tray kit (AR-TR2)
Printer server card (AR-NC3D)

●

First-copy time may differ depending on operating conditions, such as power-supply voltage and
room temperature.

●

Some options may not be available in some countries.

As a part of our policy of continuous improvement, SHARP reserves the right
to make design and specification changes for product improvement without
prior notice. The performance specification figures indicated are nominal
values of production units. There may be some deviations from these values
in individual units.

Summary of Contents for AR-205





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands