Sharp AR-201 Operation Manual Download Page 8

Page: 8 / 84

GETTING ST

TED

Operation

panel

PART NAMES AND FUNCTIONS

INTERRUPT (

) key and indicator (p. 25)

Interrupts a copy run.

Copy quantity display

Displays the specified copy quantity during the ready
condition and displays the copy countdown as copies
are made. Also see items

and

ZOOM indicator (p.17)

Lights up when a zoom ratio is set.

Copy ratio display (

) key (p. 17)

Press and hold down during standby to display the copy
ratio in the copy quantity display.

Zoom keys (p. 17)

Use to select any reduction or enlargement copy ratio
from 50% to 200% in 1% increments.

PAPER SIZE ENTER (

) key (p.12)

Use to set the paper size in a tray.

AUDIT CLEAR (

) key (p.13)

Closes an open account.

PAPER SIZE indicators

Light up to show the selected copy paper size.

Alarm indicators

: Maintenance indicator (p.35)
: Toner cartridge replacement required indicator

(p.28)

: Developer replacement required indicator (p.35)
: Paper required indicator (p.10)
: Misfeed indicator (p.30)

POWER SAVE (

) indicator (p. 43)

Lights up when the copier is in a power save mode.

SPF indicator (p. 58)

Lights up when originals are set in the optional SPF
tray.

Output tray full indicator (p. 61)

Indicates copies must be removed from the paper output
tray.

B/W REVERSE (

) key and indicator (p. 23)

Press to reverse the black and white areas.

XY-ZOOM (

) key and indicator (p. 21)

Press to change the horizontal and vertical copy ratios
independently.

SORT/GROUP (

) key and indicators

(p. 61)

Press to select the sort or group mode when an optional
electronic sorting kit and an optional SPF are installed.

ORIGINAL DATA (

) indicator

Blinks when the memory becomes full of scanned
original image data. (Used when an optional electronic
sorting kit and an optional SPF are installed)

2 IN 1 / 4 IN 1 (

) key and indicators

(p. 63)

Press to select the 2 in 1 or 4 in 1 mode. (Only available
when an optional electronic sorting kit and an optional
SPF are installed)

AUTO/MANUAL/PHOTO (

) key and

indicators (p. 14)

Use to sequentially select the exposure modes: AUTO,
MANUAL, or PHOTO.

Light (

) and dark (

) keys and indicators (p.

15)

Use to adjust the MANUAL or PHOTO exposure level.

Numeric keys

Use to select the desired copy quantity or to make user
program entries.

GETTING ST

TED

art names and functions

Summary of Contents for AR-201





















































































Search results

Summary of Contents for AR-201

Reviews:

Related manuals for AR-201

Brands by name

Popular brands

Sharp AR-201, Operation Manual

Search results

Summary of Contents for AR-201

Reviews:

Related manuals for AR-201

Brands by name

Popular brands